2.

Press Down Arrow until Clock is highlighted, and then press Return. You'll see the display shown in Figure 1-11.

Figure 1-11
Clock display

Oops! If you don't see this display, press Esc (escape) to get back to the Control Panel menu. This time, make sure Clock is highlighted before you press Return. Press Up Arrow if one of the options below Clock is highlighted.

3,

Notice that Month is highlighted. Press Left Arrow or Right Arrow until the number representing Month is correct. (For January, set the month to 1; for February, set the month to 2, and son on.)

4.

Next, press Down Arrow to highlight Day, and then press Left Arrow or Right Arrow until the day is correct, just as you did to set the month.

5.

Next, press Down Arrow to move to Year, Hour, and Minute and set them the same way—by using Left Arrow or Right Arrow. (Setting Seconds probably isn't necessary, but you can do that too if you want.)

6.

Press Return to save your settings.

At this point, you should find yourself back at the Control Panel menu with the correct date and time displayed in the box in the upper-right corner of the screen.

14

Chapter 1: Meet Your Apple IIGS